Be updated and get notified on our news updates.
BUILDRITE SOLID CURE is a non-shrink, cement-based, high strength developing grout which is specially formulated for use in critical grouting operations where positive expansion and non-staining characteristics are required.
5kg - .27sqm @ 10mm
- To provide heavy duty support beneath load bearing units
- Grouting of precast wall panels
- Anchor bolt fixing
- Bedding bearing plates
- Concrete repairs and pressure grouting
- Ease of applications
- Positive expansion to ensure effective contact and support
- Minimal downtime • Elimination of site batching errors
- High early strength and low permeability
- Elimination of staining or deterioration
- Chloride-free permitting use in contact with reinforced steel
BUILDRITE SOLID CURE is a non-shrink, cement-based, high strength developing grout which is specially formulated for use in critical grouting operations where positive expansion and non-staining characteristics are required
25kg - 1.35sqm @ 10mm
- To provide heavy duty support beneath load bearing units
- Grouting of precast wall panels
- Anchor bolt fixing
- Bedding bearing plates
- Concrete repairs and pressure grouting
- Ease of applications
- Positive expansion to ensure effective contact and support
- Minimal downtime • Elimination of site batching errors
- High early strength and low permeability
- Elimination of staining or deterioration
- Chloride-free permitting use in contact with reinforced steel
BUILDRITE CEMENT GRIP is a multi-purpose adhesive based on VAE resin emulsion. It is water-based, milky white, non-toxic, medium viscosity, which dries to a transparent film.
4 Ltrs = Depends on the area of application
- For bonding cementitious floor toppings, renders and repair mortars
- Bonding agent for concrete
- Resurfacing, renovation, surface restoration
- Bonding agent for tiles
- Repair cracks and holes in cementitious structures.
- Easy to use – can be applied by brush, roller or spray
- Multi-purpose adhesive
- Bonds to most common construction materials except polythene, PVC, rubber and similar materials
- Non toxic
- Improved flexibility
BUILDRITE CURE SIL is a ready to use liquid curing compound based on selected grades of paraffin wax which when applied to surfaces of newly placed concrete, assist in the retention of water during hydration.
20Ltrs - (Depends on the concrete)
- Runways
- Pavements
- Bridgeworks
- Motorways
- Ease of application
- Protects concrete surfaces against sun, wind and rain.
- Retains moisture in fresh concrete
- Assists in the development of strength and durability of concrete and reduces the likelihood of cracking or dusting of concrete surfaces
- Prevents rapid evaporation of water
- Effective under any temperature and humidity conditions
- Single coat application by low water sprayer
BUILDRITE CURE SIL is a ready to use liquid curing compound based on selected grades of paraffin wax which when applied to surfaces of newly placed concrete, assist in the retention of water during hydration.
200Ltrs - (Depends on the concrete)
- Runways
- Pavements
- Bridgeworks
- Motorways
- Ease of application
- Protects concrete surfaces against sun, wind and rain.
- Retains moisture in fresh concrete
- Assists in the development of strength and durability of concrete and reduces the likelihood of cracking or dusting of concrete surfaces
- Prevents rapid evaporation of water
- Effective under any temperature and humidity conditions
- Single coat application by low water sprayer
BUILDRITE CUREFORM 300S is a low viscosity release agent for all types of concrete formwork
20Ltrs - 1Ltr = 20 to 60m2
Application to all types of formwork including metal, wood, polyester or plywood where good surface finish and optimum release are required
- Improve concrete off-form finish and ensure optimum release
- Promotes easy and efficient stripping of forms
- Non-staining and economical
- Minimizes cleaning of shutter before re-use
- Easy and inexpensive to apply for spray
- Improves surface quality
- Can be used on all types of formwork
BUILDRITE CUREFORM 300S is a low viscosity release agent for all types of concrete formwork
200Ltrs - 1Ltr = 20 to 60m2
Application to all types of formwork including metal, wood, polyester or plywood where good surface finish and optimum release are required
- Improve concrete off-form finish and ensure optimum release
- Promotes easy and efficient stripping of forms
- Non-staining and economical
- Minimizes cleaning of shutter before re-use
- Easy and inexpensive to apply for spray
- Improves surface quality
- Can be used on all types of formwork
BUILDRITE CONFIX IJ a general purpose epoxy injection resin is a 2-component solvent-free, non-pigmented epoxy resin compound with low viscosity.
500ml = Depends on the area of application
- Structural repair of cracked concrete by injection
- Repair and filling of small hairline cracks in reinforced concrete structures
- Primer for solvent-free coating and topping systems
- Sealer for cement-based surface
- Low viscosity
- Economical
- Resistant to wide range of chemicals
- Virtually impermeable therefore protecting the concrete against carbonation
- High compressive and tensile strength
- High slant shear bond strength
Compressive Strength:
10,000 - 12,000 PSI
Tensile Strength:
5,000 – 10,000 PSI @ 28 days
BUILDRITE CONFIX IJ a general purpose epoxy injection resin is a 2-component solvent-free, non-pigmented epoxy resin compound with low viscosity.
3kg gal set = Depends on the area of application
- Structural repair of cracked concrete by injection
- Repair and filling of small hairline cracks in reinforced concrete structures
- Primer for solvent-free coating and topping systems
- Sealer for cement-based surface
- Low viscosity
- Economical
- Resistant to wide range of chemicals
- Virtually impermeable therefore protecting the concrete against carbonation
- High compressive and tensile strength
- High slant shear bond strength
Compressive Strength:
10,000 - 12,000 PSI
Tensile Strength:
5,000 – 10,000 PSI @ 28 days
BUILDRITE CONFIX ANCHOR is Adopted with modified epoxy resin and composite materials, CONFIX ANCHOR is a Styrene Free system for use as a high strength, non-shrink anchor grouting material. Its advantage on steel bar planting has been proved by many testimonies.
390ml = Depends on the area of application
- All concrete building without embedded steel bar
- Reinforcement and reconstruction of buildings with concrete
- Reinforcement and reconstruction of Railway, Road, Bridge, Water resources, Tunnel, etc.
- Reinforcement for equipment, pipeline installation, supports of curtain wall.
- High bonding strength, good flexible performance similar as embedded.
- Ageing resistance, good heat tolerance and does not creep at ambient temperature;
- Low sensitivity in moist condition with long-term load stability;
- Acid-resistant, good shock resistance, stress-free fixed;
- Good thixotropic, particularly applicable to the sides or top surface anchoring;
- Two-cylinder direct-mix package, with a dedicated glue gun without manual mixing
Compressive Strength
13,000 – 27,000 PSI
Tensile Strength
5,000 – 27,000 PSI @ 28 days