Get up to date with the latest news and blogs!
BUILDRITE POLYCOAT GRIP is a modified polyurethane coating formulated to provide high performance and abrasion resistance to floors. Particular aggregates were added to the coating to provide anti-slip protection to prevent slips or skids on dry and wet floorings.
PACKAGING:
4Liters
THEORETICAL SPREADING RATE:
4L container can cover 3.3 square meter at 500 microns DFT
● Better anti-slip grip
● Excellent color retention
● Low odor and non-toxic
● Durable and excellent adhesion to surfaces
● Non-flammable
FLOORTEK PF is a clear/colorless, ready-to-use, liquid binder used to compact clean, dry pebbles to create permeable pavements, walkways, patios, landscapes, trails, etc. It provides a strong cross-linking bond between pebbles while still allowing water to drain into the ground.
Once the binder is mixed evenly with pebbles, the blended material can be troweled and tamped into place to form a smooth, beautiful surface.
The use of FLOORTEK PF to create permeable floors can be applied to residential and commercial areas that are prone to water accumulation.
HARDCRETE PF is available in gallon and 20-liter pail.
- Patios
- Walkways/trails
- Planter beds/landscapes
- Drainage basin (stormwater management)
- Roof decks
- Parking lots
- Garages
- Gazebos
- Low viscosity
- Creates a stunning floor design
- Drains water quickly
- Reduce stormwater runoff
- Easy handling and dosing
- UV stable with ultra-clear finish
- Blended mixture trowels easily
- Easy to install using common tools
- Environmentally safe
EPOCOAT MORTAR SD is a three-component epoxy-based floor topping formulated from high-grade resins and curing agents, especially for flooring applications. It is a solvent-free combination of epoxy resin, amine hardener, and graded aggregates. It is in a pre-weighed unit which is ready for on-site mixing and application.
an 8-liter pack can cover 1.6 m2 at 5mm thickness
- Ideal for floor topping new and existing flooring of food processing plants, chemicals, pharmaceutical factories, sugar, and oil refineries.
- Chemical handling and process areas
- Patching of deteriorated flooring
- Durable, hard-wearing surface with excellent resistance to abrasion and a wide range of chemicals
- Good gripping surface to both pedestrian and vehicular traffic
- Long service life
- Easier to clean, resulting in low maintenance costs
EPOCOAT MORTAR SL is a three-component epoxy-based floor topping formulated from high-grade resins and curing agents, especially for flooring applications. It is highly recommended for use in a wide range of industrial environments. It provides a dense, impervious, and chemically resistant floor surface that is hygienic and easy to clean. When laid, it gives a smooth, light-reflective surface. It is available in a range of colors.
Packaging: 8-liter pack consisting of a base, hardener, and filler
Coverage: an 8-liter pack can cover 8m2 at 1mm thickness
- Ideal for floor topping new and existing flooring of food processing plants, chemicals, pharmaceutical factories, sugar, and oil refineries.
- Production areas, kitchens, plant rooms, car parks, and garages
- Patching of deteriorated flooring
- Warehouses
- Gasoline station and others
- Durable, hard-wearing surface with excellent abrasion resistance and adhesion to substrates
- Hygienic – provides a dense, impervious, seamless floor surface floor that is easily cleaned
- Easier to clean, resulting in low maintenance costs
- Attractive as available in a range of colors to improve the working environment
- Designed for a general maintenance coating where gloss and color retention are maintained
POLYCOAT FLEX is one component water-based acrylic polyurethane floor coating designed for indoor and outdoor sports floors (Basketball, tennis, and badminton courts). It has excellent mechanical, thermal, and UV resistance property that allows longer service life for the floor coating.
Packaging: 3.9 Gallon
Coverage: One pail covers approximately 19m2 at 1mm thickness depending upon site conditions
- Ideal for outdoor and indoor sports facilities (basketball, tennis, track, and fields)
- Basement floor, garage, balconies, and patios
- Easy to Apply
- Excellent curing
- UV resistant, non-yellowing
- Anti-fracture, no blistering
- Outstanding adhesion
- Resistant to chalking, fading and flaking
POLYCOAT MORTAR MD is a 3-4 mm thick, trowel-applied polyurethane mortar floor finish. It is an attractive smooth, matt, colored floor finish.
PACKAGING
POLYCOAT MORTAR is supplied in 3 components:
Part A – Base/ Part B - Hardener/ Part C- Filler
20 kgs set
COVERAGE
20kg set can cover 2.7-3.0m2 at 3-4 mm thickness medium duty
30kg set can cover 2.0 -2.2m2 at 5-6 mm thickness heavy duty
FOOD INDUSTRY:
- Kitchen floors Cold Storage
- Meat processing
- Supermarkets
- Catering and laundry areas
- Seamless, hygienic finish
- Impact and abrasion resistant surface suitable for heavy foot traffic and forklift operation
- Low odor, fast cure installation (1 hour)
- Excellent corrosion and chemical resistance
- Steam Cleanable: non-dusting, non-tainting
- Anti-slip surface
FLOORTEK TARC is an acrylic, solvent-based paint used to mark roads. It is fast-drying and durable; it can withstand the wear-and-tear on roads or floors with heavy traffic. It contains reflectorized glass beads that are premixed on paint for better visibility on the road. It is relatively easier to apply compared to Hot-Applied Thermoplastic Reflectorized Coatings. FLOORTEK TARC is a Cold-Applied Thermoplastic Reflectorized Coating that does not require machines to apply the glass beads.
THEORETICAL COVERAGE:
35-37 sq. meter/gallon at 50 microns per coat
22-25 sq. meter/gallon at 75 microns per coat
Apply in 2 – 3 coats for optimum performance
- Concrete flooring
- Asphalt
- Platered wall
- Better eye visibility
- Weather resistant
- Good abrasion resistant
- Quick drying
FLOORTEK S is a clear, single-pack, ready-to-use, low-viscosity penetrating sealer that can be directly applied to concrete surfaces straight from the container. It is a blend of special resins in aromatic solvents specially formulated for indoor and outdoor concrete, masonry, brickwork, renders, and screed surfaces. It is also an excellent sealer for exposed aggregate finishes and porous toppings.
When applied, it reacts chemically to produce a hard, dust-proof, dense, glossy finish. It also improves the substrate’s external weathering resistance, abrasion resistance, and reduces its permeability to water and salt solutions.
FLOORTEK S typically covers 5 – 7 m2/liter/coat
For application to all surfaces, FLOORTEK S can be applied using a brush or roller. 2 coats are recommended.
Note: Ensure that the substrate is dry before application.
- Simple brush or spray application
- Dries to a hard and tack-free film
- Excellent chemical and stain resistance
- Prevents dusting by sealing the surface
- Durable finish and abrasion-resistance
- Provides a dust-free finish
- Non-yellowing
- No film cracking
FLOORTEK PF is a clear/colorless, ready-to-use, liquid binder used to compact clean, dry pebbles to create permeable pavements, walkways, patios, landscapes, trails, etc. It provides a strong cross-linking bond between pebbles while still allowing water to drain into the ground.
Once the binder is mixed evenly with pebbles, the blended material can be troweled and tamped into place to form a smooth, beautiful surface.
The use of FLOORTEK PF to create permeable floors can be applied to residential and commercial areas that are prone to water accumulation.
HARDCRETE PF is available in gallon and 20-liter pail.
- Patios
- Walkways/trails
- Planter beds/landscapes
- Drainage basin (stormwater management)
- Roof decks
- Parking lots
- Garages
- Gazebos
- Low viscosity
- Creates a stunning floor design
- Drains water quickly
- Reduce stormwater runoff
- Easy handling and dosing
- UV stable with ultra-clear finish
- Blended mixture trowels easily
- Easy to install using common tools
- Environmentally safe
FLOORTEK PROTEK is a silane-terminated binder based on α-silane technology for the impregnation of mineral substrates or as a thin layer coating for mineral substrates or wood.
Available in 20-liter pail and 200-liter drum
Should be applied in two coats at the rate of 0.2 liters/m2 per coat
FLOORTEK PROTEK is applied for stain-resistant impregnation and coating mineral substrates, e.g., polished or non-polished concrete floors, paving stones, clinker, bricks, and natural stone.
Additionally, FLOORTEK PROTEK can be used as a wood coating binder for interior use, e.g., parquet flooring, and furniture.
- Low viscosity
- Solvent and plasticizer-free
- Easy handling and dosing
- Resistant to moisture
- Cure without tin catalyst