Products

Tiling

SMARTBOND FLEX
FLEXIBLLE Tile Adhesive
DESCRIPTION

SMARTBOND FLEX, FLEXIBLE TILE ADHESIVE conforms to BS EN12004 type C, S & T. This product is a flexible and ready-to-use cement-based tile adhesive created to properly bond most types of tiles for floors, walls, indoor and outdoor applications. It is specially formulated using flexible polymers, light weight fillers, and special additives to provide easy mixing, excellent workability, low dust, no slump or shrinkage while maintaining optimum strength and flexibility. 

It has flexible characteristics that can absorb different stress such as concrete shrinkage and thermal expansion It can be used for basement up to higher-level floors which usually experience movements and vibrations.. It has slip-resistant capability, which prevents the tile from slipping when installed on vertical surface of walls. 

It is carefully developed to give an extended open time/pot life ideal for longer time working requirement. Its low dust emission brings health and safety advantages. Its unique water retention technology is the key to prevent tile debonding.

SMARTBOND FLEX, FLEXIBLE TILE ADHESIVE is suitable for permanent fixing of ceramic, porcelain, marble, granite, quarry tiles, mosaic, natural stones, etc. 

PACKAGE SIZE AND COVERAGE

COVERAGE

.017cbm bag of SMARTBOND FLEX, FLEXIBLE TILE ADHESIVE mixed with 7.5 to 8 liters of water will cover 5.5 sqm @ 3 mm thickness.

APPLICATION

The tile adhesive is spread on the substrate to a uniform thickness. The correct notched trowel size to use will depend on the type and size of the tiles. 

Lay the tiles onto the adhesive and ensure that a firm pressure is applied to achieve good contact with the adhesive. 

 

For large format size of tiles (60cm x 60cm and up)          back-buttering is recommended according to 

ANSI and TCNA guidelines to increase the bond strength of tile adhesive.

 

Only apply to areas which can be tiled in the adhesive’s open wet time. 

 

Careful checks have to be made to ensure that skinning does not occur on the surface of the adhesive before laying the tiles. If skinning has occurred, rework the adhesive before laying the tiles.

 

The adhesive will remain workable for 90 minutes, has an open time of 20-30 minutes and can be grouted after 24 hours after laying the tiles. 

 

CUSTOMER BENEFITS 

  • Provides 10% more coverage than a traditional tile adhesive

  • Endures Structural movement

  • Prevents tile debonding

  • Reduces the weight of structure and cost of transport 

  • Follows European standard

  • Made from recycled materials

BUILDRITE SMARTBOND STANDARD TILE ADHESIVE C1
Standard Tile Adhesive
DESCRIPTION

BUILDRITE SMARTBOND STANDARD TILE ADHESIVE C1 conforms to BS EN12004 type C1. This product is an outstanding ready to use cement-based tile adhesive created to properly bond most types of tiles for indoor and outdoor installation

PACKAGE SIZE AND COVERAGE

.017cbm bag = 5.5sqm @ 3mm thickness

  • 30cm x 30cm & below size of tiles
  • Ceramic & earthenware
  • Basement to 3rd floor application
  • Indoor and floor application
  • Provides 10% more coverage than a traditional tile adhesive
  • Endures Structural movement
  • Prevents tile debonding
  • Reduces the weight of structure and cost of transport 
  • Follows European standard
  • Made from recycled materials 
BUILDRITE SMARTBOND STANDARD TILE ADHESIVE C1S1
Standard Tile Adhesive
DESCRIPTION

BUILDRITE SMARTBOND STANDARD TILE ADHESIVE C1S1 conforms to BS EN12004 type C1S1. This product is an outstanding ready to use cement-based tile adhesive created to properly bond most types of tiles for indoor and outdoor installation

PACKAGE SIZE AND COVERAGE

.017cbm bag = 5.5sqm @ 3mm thickness

  • 30cm x 30cm & below size of tiles
  • Ceramic & earthenware
  • All floors application
  • Indoor and outdoor application
  • Floor and wall application
  • Provides 10% more coverage than a traditional tile adhesive
  • Endures Structural movement
  • Prevents tile debonding
  • Reduces the weight of structure and cost of transport 
  • Follows European standard
  • Made from recycled materials 
BUILDRITE SMARTBOND HEAVY-DUTY TILE ADHESIVE C2
Heavy-Duty Tile Adhesive
DESCRIPTION

BUILDRITE SMARTBOND HEAVY-DUTY TILE ADHESIVE C2 conforms to BS EN12004 type C2. This product is an outstanding ready to use cement-based tile adhesive created to properly bond most types of tiles for indoor and outdoor installation

PACKAGE SIZE AND COVERAGE

.017cbm bag = 5.5sqm @ 3mm thickness

  • 60cm x 60cm & below size of tiles
  • Ceramic & earthenware
  • Basement to 3rd floor application
  • Indoor and floor application
  • Provides 10% more coverage than a traditional tile adhesive
  • Endures Structural movement
  • Prevents tile debonding
  • Reduces the weight of structure and cost of transport 
  • Follows European standard
  • Made from recycled materials 
BUILDRITE HEAVY-DUTY TILE ADHESIVE C2S1
Heavy-Duty Tile Adhesive
DESCRIPTION

BUILDRITE HEAVY-DUTY TILE ADHESIVE C2S1 conforms to BS EN12004 type C2S1. This product is an outstanding ready to use cement-based tile adhesive created to properly bond most types of tiles for indoor and outdoor installation

PACKAGE SIZE AND COVERAGE

.017cbm bag = 5.5sqm @ 3mm thickness

  • 60cm x 60cm & below size of tiles – indoor & outdoor application
  • Porcelain, mosaic and most types of tiles
  • All floor level application
  • Floor and wall application
  • Provides 10% more coverage than a traditional tile adhesive
  • Endures Structural movement
  • Prevents tile debonding
  • Reduces the weight of structure and cost of transport 
  • Follows European standard
  • Made from recycled materials 
BUILDRITE SMARTBOND HEAVY-DUTY TILE ADHESIVE C2S2
Heavy-Duty Tile Adhesive
DESCRIPTION

BUILDRITE SMARTBOND HEAVY-DUTY TILE ADHESIVE C2S2 conforms to BS EN12004 type C2S2. This product is an outstanding ready to use cement-based tile adhesive created to properly bond most types of tiles for indoor and outdoor installation

PACKAGE SIZE AND COVERAGE

.017cbm bag = 5.5sqm @ 3mm thickness

  • 60cm x 60cm & above size of tiles
  • Porcelain and most types of tiles
  • All floors application
  • Indoor and outdoor application
  • Floor and wall application
  • Provides 10% more coverage than a traditional tile adhesive
  • Endures Structural movement
  • Prevents tile debonding
  • Reduces the weight of structure and cost of transport 
  • Follows European standard
  • Made from recycled materials 
BUILDRITE GRANITE POLYMER C2
C2 type Granite Tile Adhesive
DESCRIPTION

BUILDRITE GRANITE POLYMER C2 is a white cementitious powder especially formulated to be mixed with water as tile adhesive with very good adhesion strength

PACKAGE SIZE AND COVERAGE

25kg = 6-7sqm @ 2-3 thickness

  • Both wall and floor 
  • Internal and external areas
  • Ready and easy to use 
  • Vertical and horizontal application 
  • Non-sag properties 
  • Excellent bond to the concrete substrate 
  • Good open time 
  • Good slip resistance
BUILDRITE TILE SEAL
Tile Grout
DESCRIPTION

BUILDRITE TILE SEAL is cement based tile joint filler designed for use with most ceramic tiles and natural stones.  It is formulated using anti-bacterial and anti-fungus materials to prevent formation of   molds and mildew.  It has a strong water repellency which reduces water absorption

PACKAGE SIZE AND COVERAGE

2kg = 8sqm @ 3mm thicknes

  • Both wall and floor 
  • Internal and external areas
  • Economical to use
  • Prevents water seepage
  • Prevents mould build up
  • Prevents cracks during movement
  • Good adhesion and prevents debonding
  • Available colors: white, cream, brown, dark gray
BUILDRITE TILE GRIP
Ceramic Tile Adhesive Additive
DESCRIPTION

BUILDRITE TILE GRIP is a light beige powder especially formulated to be mixed with cement and sieved sand prior to addition of water as tile adhesive with very good adhesion strength

PACKAGE SIZE AND COVERAGE

250g = 6 - 9sqm @ 2-3mm thickness

  • Economical to use
  • Non-sag properties
  • Excellent bond to the concrete substrate
  • Good open time
  • Will produce 5.2 bags of 25kg tile adhesive
BUILDRITE KLARO ( 250ml )
Anti-Slip Flooring
DESCRIPTION

KLARO is tile floor treatment that increases floors coefficient of friction by up to 500% without changing the appearance or feel of the tile flooring.

PACKAGE SIZE AND COVERAGE

250ml = 2.5sqm

  • Shower rooms
  • Bathrooms
  • Porcelain bathtubs
  • And other floor tiles that require solution to “slippery when wet” problem
  • Safe to use
  • Surface is ready to walk on immediately after treatment
  • Single treatment makes tiles non-slip for years
  • Can be re-applied as often as necessary
  • Fast acting and easy to apply

Be updated and get notified on our news updates.