Get up to date with the latest news and blogs!
BUILDRITE PUTTY MASTER (1kg)
Joint Filler & Plaster Putty for Fiber Cement Board, Gypsum, Wood and Concrete
DESCRIPTION
BUILDRITE PUTTY MASTER is a multi-purpose ready to use smooth base preparation for a wide range of non-structural filling, leveling, patching, and repair jobs on wood, concrete, fiber cement, and fiber boards.
PACKAGE SIZE AND COVERAGE
1kg container can cover 5m2 per coat
- Filling of hollows, dents, holes, knots on wood prior to finishing
- Leveling and patching work on concrete, wood and similar substrates
- For non-structural repair
- Excellent bond to wide variety of substrates
- Provides smooth finish
- Rapid setting time
- Low shrinkage
- Good sanding properties
- Made from highest quality binders & fillers
- For interior and exterior use
SAPAL 2 in 1 (4L)
Paintable Elastic Sealant & Waterproofer
DESCRIPTION
SAPAL is weather-resistant, water-based acrylic sealant and waterproofer for use as sealant and waterproofing membrane.
PACKAGE SIZE AND COVERAGE
4L container can cover 56sqm per coat
- Firewalls
- Exterior walls
- Parapet walls
- Canopy
- Ledges
- 2 in 1 Solution - can be used as both a sealant to seal cracks and a waterproofer for walls
- Flexible
- Crack resistant
- UV & weather resistant
- Paintable
- Water-based
RITEMIX PCR200 (3000-4000 PSI) (200L)
DESCRIPTION
RITEMIX PCR200 is an amber to light brown, new-generation admixture based on polycarboxylate polymers. Its water-reducing property ensures good workability, high and early compressive strength. It is an effective cement dispersant and fluidifier compared to conventional superplasticizers.Switch to plain text editor
- As a superplasticizer to produce fluid concrete, requiring little to no vibration during placing, especially when reinforcement is heavily congested
- As a highly efficient water-reducer that doesn’t decrease workability, resulting in reduced permeability and accelerated strength gain
- Ready mix applications
- 4000 to 6000 psi compressive strength concrete requirement
- Produces a free-flowing concrete without segregation and bleeding
- Saves substantial time and money without losing cement strength or workability
- Produces a self-compacting concrete without segregation
- Good slump retention for longer time
- Allows reduction of water, which increases concrete density, reduces porosity, and improves water impermeability
- Reduces concrete segregation to improve surface finish
- Reduces or eliminates the need for compaction, which saves time and money
- Superior performance than the conventional superplasticizers
BUILDRITE CUREFORM 300S (20L)
Chemical release agent for formworks
DESCRIPTION
BUILDRITE CUREFORM 300S is a low-viscosity release agent for all types of concrete formwork.
PACKAGE SIZE AND COVERAGE
20Ltrs - 1Ltr = 20 to 60m2
20L to 1L container can cover an area of 20 to 60m²
Application to all types of formwork including metal, wood, polyester, or plywood where good surface finish and optimum release are required.
- Improve concrete off-form finish and ensure optimum release
- Promotes easy and efficient stripping of forms
- Non-staining and economical
- Minimizes cleaning of shutter before re-use
- Easy and inexpensive to apply for spray
- Improves surface quality
- Can be used on all types of formwork
HARDCRETE 303
DESCRIPTION
BUILDRITE HARDCRETE 303 is a cementitious pre-packed repair mortar specially designed for resurfacing, patching and repairing large areas of concrete at a minimum thickness of 3mm.
Resurfacing concrete floors
● Easy to prepare and quick to apply
● True feather edge material
● Zero VOC
● Levels new and old floors
● Adhesion to substrate, subfloors and stable adhesive residue.
● Rapid setting
● Excellent standard of finish can be achieved to allow direct application of floor coverings
BUILDRITE FLOORTEK D (20kg)
Dust Proofer, Surface Hardener and Sealing Compound for Concrete Floor
DESCRIPTION
BUILDRITE HARDCRETE D is a proprietary blend of silicates formulated specifically for concrete surface dust proofer and hardener for new and old concrete floors.
PACKAGE SIZE AND COVERAGE
a 20kg container can cover 6-10 m2/liter
Recommended for dust proofing warehouses, car parks, garages, industrial plants, and shopping malls
- Low viscosity
- Solvent and plasticizer free
- Easy handling and dosing
- Resistant to moisture
- Cure without tin catalyst
BUILDRITE BLOCKOUT ETL EPOXY TANK LINING WHITE
Epoxy Tank Lining
DESCRIPTION
BUILDRITE PROTEK EPOXY TANK LINING WHITE is a two-component epoxy coating formulated from high-grade resins and curing agents for storage tanks. It is supplied in pre-measured quantities ready for site mixing and use. It hardens to an abrasive resistance coating with high adhesive strength on properly prepared substrates such as concrete and steel.
PACKAGE SIZE AND COVERAGE
a 3.8kg container's coverage depends on the area of application
Coating the interior and exterior surfaces of concrete, steel and wooden tanks such as those used for storing potable water, chemicals (except for high concentrated acids), grains, powders, and other liquids. It may be reinforced with fiberglass as in the case of concrete structures that are not integrally waterproofed. It is also used as a grouting material to seal off the gaps where ceramic tiles are used to line storage tanks.
- Pre-packaged and proportioned
- Excellent durability
- High resistance to chemical and mechanical attack
- Can be applied to vertical and horizontal substrates
- Can be applied directly to steel and concrete
- Excellent adhesion
- Smooth, glossy, and easy to clean surface
- User friendly mix ratio
BUILDRITE STOPGAP FOAM SEAL
Expandable foam sealant
DESCRIPTION
BUILDRITE STOPGAP FOAM SEAL is a multi-purpose, one component, moisture cure, and paintable PU-foam sealant. It can be used for sealing, filling dampening, fixing, and insulating household and construction application.
PACKAGE SIZE AND COVERAGE
a 750ml container's coverage depends on the area of application
- Seals around windows, doors, siding, and baseboard
- Fills cracks and joints, gaps around pipes, vents, utility lines, and electrical outlets
- Seals and insulates gap between sole plate and concrete slab
- Flexible
- Paintable
- Non-staining
Chameleon Colorants (18ml)
DESCRIPTION
Chameleon Colorants are universal colorants especially formulated using special types of chemicals and pigments to ensure that it can blend homogenously either with water-based and solvent-based type of paints. Its high concentration can give us the colors desired in minimal amount from pastel to dark colors.
Available Colors:
- Red
- Yellow
- Blue
- Brown
- Black
- Green
- Yellow Oxide
- Red Oxide
- Violet
- Magenta
- Orange
PACKAGE SIZE AND COVERAGE
18ml
It can be used at different percentages depending on the lightness if using white paint and darkness of the paints desired if using clear bases. A dosage of 5% of volume of paint is recommended (depending upon the type of paint) to control the drying time of the paint and flocculation.
Shake or mix first before using.
Add the colorants first in a small quantity of paint before adding the mixture to the total volume while mixing until the desired color shade was achieved.
- Can be used for tinting water-based and solvent-based paint
- It will not affect the quality of paint on recommended amount
- Cost-effective
- Easy to mix
- Can produce pastel to even darker colors of paint
- Highly concentrated pigments
- Environment friendly
- High color strength
- UV and weather resistant depending on colors
- Washable with water
BUILDRITE CONFIX EC (16kg)
3-part cement and epoxy combination mortar for self-smoothing floor screeds of 1.5 to 3mm
DESCRIPTION
BUILDRITE CONFIX EC is easy and quick to apply and forms an ideal substrate for the application of self-leveling coatings.
PACKAGE SIZE AND COVERAGE
a 16kg can's coverage depends on the area of application
As a self-smoothing screed for:
- Leveling or patching horizontal concrete substrate
- Leveling layer on rough concrete flooring or concrete flooring roughened by grinding
- Smoothing over damp concrete surface before applying epoxy or polyurethane coatings
- Thin repair layers on the surface of damp substrates which do not require a particularly attractive finish
- Repair and maintenance work on monolithic or steam-cured concrete floors
- Rapid, easy application to form a smooth finish, for internal and external use
- Protective action against attack from deicing salts
- May be coated after just 24 hours with epoxy or polyurethane resin formulates
- Excellent adhesion to concrete
- Promote good adhesion with successive resin coatings
- Reduce the risk of blisters and/or detachment of successive waterproof coatings, even if applied on damp substrates
- Excellent mechanical strength
- Solvent-free
- Good leveling properties