Get up to date with the latest news and blogs!
BUILDRITE CONFIX IJ a general purpose epoxy injection resin is a 2-component solvent-free, non-pigmented epoxy resin compound with low viscosity.
3kg gal set = Depends on the area of application
- Structural repair of cracked concrete by injection
- Repair and filling of small hairline cracks in reinforced concrete structures
- Primer for solvent-free coating and topping systems
- Sealer for cement-based surface
- Low viscosity
- Economical
- Resistant to wide range of chemicals
- Virtually impermeable therefore protecting the concrete against carbonation
- High compressive and tensile strength
- High slant shear bond strength
Compressive Strength:
10,000 - 12,000 PSI
Tensile Strength:
5,000 – 10,000 PSI @ 28 days
BUILDRITE PUTTY MASTER is a multi-purpose ready to use smooth base preparation for a wide range of non-structural filling, leveling, patching, and repair jobs on wood, concrete, fiber cement, and fiber boards.
1kg container can cover 5m2 per coat
- Filling of hollows, dents, holes, knots on wood prior to finishing
- Leveling and patching work on concrete, wood and similar substrates
- For non-structural repair
- Excellent bond to wide variety of substrates
- Provides smooth finish
- Rapid setting time
- Low shrinkage
- Good sanding properties
- Made from highest quality binders & fillers
- For interior and exterior use
a 3.785L container's coverage depends on the area of application
RUBBER STOP is a one-part, neutral silicone sealant that will not stain exterior substrates. It exhibits good adhesion without primer on most building materials and displays outstanding weather resistance and durability.
a 40g container's coverage depends on the area of application
- Can be used for joints in sanitary fittings, e.g. between floor or wall and shower or wash basins.
- Particularly developed for areas exposed to high humidity where protection from water and mildew damage is essential
- Long shelf life
- Non-sag
- Readily gunnable both at low (+50 C) and high (+400 C) temperatures
- Good tooling properties
- Good adhesion
- Good weatherability
- Excellent durability
- Excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics enamel, glazed tiles); metals (e.g. aluminum, steel, zinc or copper); impregnated, varnished or painted wood; and some plastics.
POLYCOAT MORTAR MD is a 3-4 mm thick, trowel-applied polyurethane mortar floor finish. It is an attractive smooth, matt, colored floor finish.
PACKAGING
POLYCOAT MORTAR is supplied in 3 components:
Part A – Base/ Part B - Hardener/ Part C- Filler
20 kgs set
COVERAGE
20kg set can cover 2.7-3.0m2 at 3-4 mm thickness medium duty
30kg set can cover 2.0 -2.2m2 at 5-6 mm thickness heavy duty
FOOD INDUSTRY:
- Kitchen floors Cold Storage
- Meat processing
- Supermarkets
- Catering and laundry areas
- Seamless, hygienic finish
- Impact and abrasion resistant surface suitable for heavy foot traffic and forklift operation
- Low odor, fast cure installation (1 hour)
- Excellent corrosion and chemical resistance
- Steam Cleanable: non-dusting, non-tainting
- Anti-slip surface
BUILDRITE LEVEL UP 403 is a ready-to-mix self-leveling mortar. It is used for leveling out rough and uneven floor surfaces prior to the application of floor finishes e.g. tiles, carpet, linoleum, rubber, and other sheet flooring.
25kg bag can cover 5sqm at 3mm thickness
Interior floors for houses and buildings prior to the application of covering materials
- Ready to use – one pack product, simply mixed with water on site
- Very good workability and flowability
- Very good mechanical and bonding strength
- Can be used directly onto concrete floors to provide smooth surface without screeding
- Quick, easy laying, and fast hardening
- Can be feather edged to provide a smooth finish
BUILDRITE HARDCRETE 303 is a cementitious pre-packed repair mortar specially designed for resurfacing, patching and repairing large areas of concrete at a minimum thickness of 3mm.
Resurfacing concrete floors
● Easy to prepare and quick to apply
● True feather edge material
● Zero VOC
● Levels new and old floors
● Adhesion to substrate, subfloors and stable adhesive residue.
● Rapid setting
● Excellent standard of finish can be achieved to allow direct application of floor coverings
BUILDRITE HARDCRETE D is a proprietary blend of silicates formulated specifically for concrete surface dust proofer and hardener for new and old concrete floors.
a 20kg container can cover 6-10 m2/liter
Recommended for dust proofing warehouses, car parks, garages, industrial plants, and shopping malls
- Low viscosity
- Solvent and plasticizer free
- Easy handling and dosing
- Resistant to moisture
- Cure without tin catalyst
SAPAL is weather-resistant, water-based acrylic sealant and waterproofer for use as sealant and waterproofing membrane.
4L container can cover 56sqm per coat
- Firewalls
- Exterior walls
- Parapet walls
- Canopy
- Ledges
- 2 in 1 Solution - can be used as both a sealant to seal cracks and a waterproofer for walls
- Flexible
- Crack resistant
- UV & weather resistant
- Paintable
- Water-based
RITEMIX PCR200 is an amber to light brown, new-generation admixture based on polycarboxylate polymers. Its water-reducing property ensures good workability, high and early compressive strength. It is an effective cement dispersant and fluidifier compared to conventional superplasticizers.Switch to plain text editor
- As a superplasticizer to produce fluid concrete, requiring little to no vibration during placing, especially when reinforcement is heavily congested
- As a highly efficient water-reducer that doesn’t decrease workability, resulting in reduced permeability and accelerated strength gain
- Ready mix applications
- 4000 to 6000 psi compressive strength concrete requirement
- Produces a free-flowing concrete without segregation and bleeding
- Saves substantial time and money without losing cement strength or workability
- Produces a self-compacting concrete without segregation
- Good slump retention for longer time
- Allows reduction of water, which increases concrete density, reduces porosity, and improves water impermeability
- Reduces concrete segregation to improve surface finish
- Reduces or eliminates the need for compaction, which saves time and money
- Superior performance than the conventional superplasticizers